1 idc smt coax connector series 9178 avx has developed a unique 50 ohm smt coax connector based on our industry proven discrete wire insulation displacement connector (idc) technology. by combining two different sized idc contacts, we can reliably pierce the center conductor and outside jacket dielectric materials to make electrical connection to the signal wire and braid (ground connection). designed specifically for rg178 cable, the concept can be applied to other cable sizes. the connector comes with a pre-attached cap in tape & reel packaging. the coax cable only needs the outer jacket and braid stripped. the cable is then inserted into the connector and the cap can be pressed down via a small press or hand tool. the biggest advantage of this connector is that it is extremely easy to terminate, no soldering, additional stripping processes or crimp tools are needed. the all plastic design is more cost effective than plated screw machine components while providing a vswr less than 1.2:1 in excess of 700mhz. electrical ? current rating: 0.5a (current limit is cable dependent) ? voltage rating: 125v ? vswr less than 1.2:1 in excess of 700mhz environmental ? operating temperature: -40oc to +125oc mechanical ? insulator material: nylon 46: ul94v0 ? contact material: phosphor bronze, tin plated ? latching cap: single use ? cable retention: 10n in each axis features and benefits ? ?gas tight? idc termination for long term reliability ? simple strip, insert and press down termination process ? high temperature endurance testing for 1000 hrs at 125oc ? industrial operating temperature range for harsh environments applications ? reliable & repeatable termination of rg178 coax cable to a pcb to replace hard solder connections ? cost effective replacement of standard coax connectors in low frequency applications for rg178 cable ? standard microminiature type rf products: gps, radio boards, meters, rfid and data communications ? application notes: refer to 201-01-131 9178 series 00 prefix 00x number of ways how to order x insulator color 00x cable type 001 = rg178b/u (m17/93-rg178) code color application 0 black industrial 1 white lighting code no of details ways 001 1 page 2 06 plating option 06 = pure tin all over
2 idc smt coax connector series 9178 connector details - rg178b/u notes: 1. connector for rg178b/u (m17/93-rg178) mil spec coax cable. for other cables refer to avx for further information. 2. for further details refer to elco product specification 201-01-130 and application notes 201-01-131. 3. general tolerance 0.20 unless specified. 4. connector supplied as shown with the cap in the up position. notes: 1. connector shown in assembled condition, cap pushed down. 2. cap locks in lower position, termination cannot be remade. 3. for full details refer to application notes 201-01-131. 4. connector for rg178b/u (m17/93-rg178) mil spec coax cable only. 5. all loose material must be removed from trimmed cable. cable insertion direction also refer to page 3 for packing orientation wired connector
3 idc smt coax connector series 9178 suggested pcb layout notes: 1. pads shown for connector feet only, other details will depend on the customers pcb specification and performance requirements. 2. outline of the connector. 3. typical circuit configuration: braid connected through board to ground plane. center conductor track 1.5mm wide on 0.8mm thick pcb notes: 1. packing in tape and reel. 2. pieces per reel. 3. parts to be in the correct orientation. packing details reel qty 700 leader 480mm trailer 120mm
idc smt coax connector series 9178 hand assembly tool a kyocera group company notice: specifications are subject to change without notice. contact your nearest avx sales office for the latest specification s. all statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements or sug gestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. the user shoul d not assume that all safety measures are indicated or that other measures may not be required. specifications are typical and may not apply to all applications. ? avx corporation s-040500m610-c americas avx myrtle beach, sc tel: 843-448-9411 avx northwest, wa tel: 360-699-8746 avx midwest, in tel: 317-861-9184 avx mid/pacific, ca tel: 408-988-4900 avx northeast, ma tel: 617-479-0345 avx southwest, ca tel: 949-859-9509 avx canada tel: 905-238-3151 avx south america tel: +55-11-4688-1960 europe avx limited, england tel: +44-1252-770000 avx s.a.s., france tel: +33-1-69-18-46-00 avx gmbh, germany tel: +49-8131-9004-0 avx srl, italy tel: +39-02-614-571 avx czech republic tel: +420-57-57-57-521 avx/elco uk tel: +44-1638-675000 elco europe gmbh tel: +49-2741-299-0 avx s.a., spain tel: +34-91-63-97-197 avx benelux tel: +31-187-489-337 asia-pacific avx/kyocera (s) pte ltd., singapore tel: +65-6286-7555 avx/kyocera, asia, ltd., hong kong tel: +852-2363-3303 avx/kyocera yuhan hoesa, south korea tel: +82-2785-6504 avx/kyocera hk ltd., taiwan tel: +886-2-2656-0258 avx/kyocera (m) sdn bhd, malaysia tel: +60-4228-1190 avx/kyocera international trading co. ltd., shanghai tel: +86-21-3255 1933 avx/kyocera asia ltd., shenzen tel: +86-755-3336-0615 avx/kyocera international trading co. ltd., beijing tel: +86-10-6588-3528 avx/kyocera india liaison office tel: +91-80-6450-0715 asia-ked (kyocera electronic devices) ked hong kong ltd. tel: +852-2305-1080/1223 ked hong kong ltd. shenzen tel: +86-755-3398-9600 ked company ltd. shanghai tel: +86-21-3255-1833 ked hong kong ltd. beijing tel: +86-10-5869-4655 ked taiwan ltd. tel: +886-2-2950-0268 ked korea yuhan hoesa, south korea tel: +82-2-783-3604/6126 ked (s) pte ltd. singapore tel: +65-6509-0328 kyocera corporation japan tel: +81-75-604-3449 notes: 1. use 9176 cap application tool 06-9176-7018-01-000. 2. details of assembly procedure refer to application notes 201-01-131.
|
